8 Steps You Can Take to Prepare Your Furnace for Winter
Don’t put off furnace maintenance until January!
It’s important for North Carolina residents to get ready for winter before temperatures plummet. Be sure to clean, maintain and test your furnace. This will prevent the system from failing on a cold winter night. Proper service also enhances energy efficiency and ensures that your equipment warranty remains in effect. Follow these steps for a safer and more efficient furnace.
1. Clean Various Heating System Components.
Each type of furnace necessitates different tasks. You may need to clean coils, burners, the blower motor, ducts or a heat exchanger. Most furnace maintenance professionals offer this service. Keep in mind that equipment may collect dust in the summer.
2. Replace or Wash Your Furnace’s Air Filter.
The system may contain multiple filters, especially if it has a built-in humidifier. It’s possible to clean a permanent filter and use it again. Other units need replacement every 30 to 90 days. This maintenance task boosts reliability and efficiency.
3. Oil the Blower Motor’s Bearings.
This will help prevent your equipment from running noisily or inefficiently. However, you ought to look at the system’s instruction manual beforehand; some motors don’t require lubrication. Perform this task a minimum of once every 12 months.
4. Schedule Preventative Maintenance.
An alternative is to call a furnace repair contractor and schedule a yearly tuneup. The technician will maintain, clean, lubricate and test your equipment. He or she can also check for a variety of safety hazards. Most HVAC professionals and manufacturers recommend annual inspections, according to Angie’s List.
5. Look at Each Heat Vent in Your Home.
Confirm that no one has closed or covered these openings. Remove any clothing, rugs, furniture or other objects. This will prevent your equipment from overheating. Vacuum the grilles to improve efficiency.
6. If You Have a Chimney, Take the Time to Inspect It.
Soot accumulations, animal nests or tree debris could increase the risk of a fire. Your chimney may need cleaning. If you don’t want to walk across the roof or handle soot, contact a skilled chimney sweeper.
7. Test Your Home’s Carbon Monoxide Alarm.
The detector might need a new battery. Although these alarms aren’t essential in houses with electric furnaces and appliances, you should own at least one unit if your system burns oil, gas or another fuel. Carbon monoxide poisoning may trigger headaches and fatigue before it causes severe health problems.
8. Prepare the Furnace’s Thermostat for Winter.
You may need to reprogram it or activate its heating mode. Test the thermostat to verify that your heating system still works correctly. If the furnace doesn’t produce heat, check its fuel source and the emergency shut-off switch.
Thermo Direct has 17 years of experience in the furnace repair industry. We provide prompt, professional service at competitive rates. If your Raleigh-area home has HVAC equipment that needs pre-winter maintenance, please contact Thermo Direct’s friendly staff to schedule an appointment.